| 型号 | 数据表 | 描述 | Converter series | Delivery content | |
|---|---|---|---|---|---|
| HZZ00615-G |
|
DIN-Rail Mounting Bracket Kit | PSS, S, HR, ER, HRL, ERL, LR, PSK, K, HRP, ERP, LRP | Two aluminum brackets to be mounted on each side of the converter, including a clamp | |
| HZZ00608-G |
|
DIN-Rail Mounting Support Kit | PSA (144 V) | PCB, screw terminal blocks, 4 diodes, PSA capacitor C1 and C- or D-bracket with screws | |
| HZZ00609-G |
|
Chassis-Mounting Support Kit | PSA (144 V) | PCB, screw terminal blocks, 4 diodes, PSA capacitor C1 and C- or D-bracket with screws | |
| HZZ00625 |
|
DIN-Rail Mounting Support Kit | IMX15, IMS15 | DIN-mounting support for 35 mm DIN-rail systems, PCB, Four 2-pole terminal blocks, Five wire jumpers 6.35 mm | |
| HZZ00607-G |
|
Chassis-Mounting Support Kit | PSR, PSA (40, 60, 80 V) | PCB, screw terminal blocks, 4 diodes, PSA capacitor C1 and C- or D-bracket with screws | |
| HZZ01210-G |
|
Mounting plate M Kit | M, H, Q, P, HP, | Mounting plate XMK085-G, 4 countersunk screws M3x6, 4 serrated sunk washers | |
| HZZ00617 |
|
Chassis-Mounting Support Kit | IMX7, IMS7 | Two mounting rails, 83 mm, Four screws M 2.5 x 6, Four nuts M 2.5, PCB, Three 2-pole terminal blocks, One 3-pole terminal block, Three wire jumpers 5.08 mm, One wire jumper 10.16 mm, Six wire jumpers 6.8 mm | |
| HZZ01215-G |
|
Mounting plate Q Kit | Q, P, HP | Mounting plate XMK162-G with brackets, 4 countersunk screws M3x6 | |
| HZZ00624-G |
|
DIN-Rail Mounting Bracket Kit | W, X | DIN-rail clamps left XKK181-G and right XKK185-G, 2 screws M4 x 12, 2 washers, 2 ribbed-lock washers | |
| HZZ00613 |
|
DIN-Rail Mounting Support Kit | IMX7, IMS7 | DIN-mounting support for 35 mm DIN-rail systems, PCB, Three 2-pole terminal blocks, One 3-pole terminal block for X2 terminal, Three wire jumpers 5.08 mm, One wire jumper 10.16 mm, Six wire jumpers 6.8 mm |
 |
mounting supports for melcher™ cassettes特殊的安装支架设计用于将电源集成到开关板、控制面板或印刷电路板等，通过底盘、导轨或
印刷电路板配套的适配器安装。19英寸盒式DC-DC和AC-DC转换器也可以通过连接到转换器的
特殊底盘安装板安装在正面底盘上。通用安装支架也适用于大多数盒式转换器，允许垂直底盘
或DIN导轨安装。支架套件由带螺丝终端连接器的印刷电路板和适用于底盘或DIN导轨安装的
支架组成，用于可安装在印刷电路板的（带Y管脚的）PSR和PSA开关稳压器，也可用于最高15
瓦的小型直流-直流转换器。为了将可印刷电路板安装的转换器与双面印刷电路板隔离，建议
使用隔离垫，如下所述。可根据客户要求提供符合RoHS的产品。 说明:特性: |